Cobra Electronics Drive Hd Dual View Dash Camera With Iradar Kit Review

Cobra SC200 Configurable Dash Cam

INTRODUCTION

Congratulations! You fabricated the smart choice past purchasing an SC Series Nuance Cam from Cobra. SC Series cameras provide peace of mind past continuously recording the route in beautiful HD video. With cutting edge features, phenomenal video quality, and an industry-leading focus on user experience, SC Dash Cams are the all-time solution to record your ride. This User Manual covers the SC 200 and SC 200D.

SC 200 DASH CAM FEATURES

• Dual Lens
  With 1600P QHD unmarried-view recording. Full HD 1080P when recording in dual-view.
• Dual Ring Wi-Fi
  Flawless Connectivity
• Instant Commuter Alerts
  Red-Light & Speed Cameras, Police force, and Community Radar alerts
• 140°
  Field of View
• Embedded GPS
  Location and Speed Data
• three" Brandish
  Crystal Clear LCD
• Includes
  SC200: 16GB SD Bill of fare
  SC200D: 8GB SD Bill of fare
• Brandish Interface Supports 6 Languages:
  •  English
  •  Castilian
  •  French
  •  German
  •  Italian
  •  Chinese

PRODUCT SERVICE AND SUPPORT

For any questions about operating or installing this new Cobra product, PLEASE CONTACT COBRA Offset…exercise non return this product to the retail shop. The contact information for Cobra will vary depending on the country in which yous purchased and utilize the product. For the latest contact data, please go to www.cobra.com/back up.

WHAT'Due south IN THE BOX

SC200D

SC200

HARDWARE INTERFACE

INSTALLATION

MOUNT
To install the Adhesive Windshield Mount, slide the dash cam onto the mount. Remove protective film from photographic camera lens and display. Detect the spot on your windshield where you would like to mountain the camera and confirm the placement. Reminder, this is an adhesive mount, so it is important to mountain correctly the outset fourth dimension. Side by side, peel the plastic film off the 3M adhesive and printing the mountain FIRMLY onto the windshield.

For a View of the Road Behind Y'all For a View of the Road Behind You Connect Extension Cable to the Video Input Port on the Nuance Cam and run the cable along the flooring of your car. Connect the Extension Cablevision to the Rear Camera and attach to the vehicle's dorsum window. Please orient the rear camera then it faces out the windshield equally shown here.

POWER
Plug ane terminate of the supplied 12V Vehicle Power Adapter into your vehicle's cigarette lighter, and the other end into the micro USB port. The unit of measurement will automatically turn on and kickoff recording. To manually power on the device Printing AND HOLD the Ability button until the display activates.

Note: A Hardwire Kit is available at www.cobra.com for a more than permanent installation that allows for discrete routing of the power cable and recording while your vehicle is off.

DRIVE!
Your dashcam is designed for like shooting fish in a barrel performance. After powering the camera volition instantly begin loop recording. When the MicroSD Bill of fare is full the oldest footage will exist deleted to make way for the new. If y'all witness something that you lot do not desire deleted but printing the Emergency Record button and it volition be saved.

Basic Operation

POWERING ON THE DEVICE
The device will power on automatically when plugged in and can also be powered by PRESSING AND Holding the On/Off push button until the display activates (when connected to ability).
LOOP RECORDINGS:
Once the SD menu is full, the photographic camera will continuously overwrite the oldest footage recorded with recent recordings. To protect a clip then that it will non be overwritten, press the Emergency Record/Favorites Button and so that the prune is moved into the locked content sectionalization.
EMERGENCY RECORDINGS:
An Emergency Recording is triggered when the Emergency Record/Favorites Push is pressed or when the 1000-Sensor registers a significant touch (hard braking or collision). Emergency Recordings create locked files that are non overwritten by Continuous Loop Recording. To ensure that important footage is not lost surrounding an incident, the prior video prune is locked if the incident happens within thirty seconds of the beginning or end of a prune.
THE MICRO SD MEMORY CARD
The device comes with a Micro SD memory card. To remove the SD card, printing firmly on the SD carte to push it farther into the slot. There will be a click and the SD card will pop out on release. Extract the menu and replace as necessary by inserting a menu into the slot and pressing until it locks in place. This camera is compatible with Micro SD cards upwards to 256GB. Delight be certain to format the card in-camera before use. Form x high-endurance cards from reputable brands are recommended for abiding video recording of a dash camera.
NAVIGATING MENUS
When in a bill of fare, printing to navigate to the menu item you want to select or change and so  printing to select or change the option associated with that item. Pressing at any fourth dimension will exit  the menu without saving changes

VOLUME ADJUST
Models with LCD displays allow the user to select "Volume" in the setting carte to and arrange volume of notifications and voice announcements. Both products with LCD displays and without allow for volume adjustment using the Drive Smarter Mobile App.

INITIAL SETUP

When first powered on, the device will show you lot the video stream and automatically begin loop recording. When the Dash Cam is first turned on, we strongly recommend to pair with the Bulldoze Smarter App to download the latest firmware and ensure your camera contains the latest features. Please follow the directions beneath to pair the app with the camera.

DRIVE SMARTER® APP Connection
Your Nuance Cam uses a Bluetooth® connectedness to the Drive Smarter app. Smartphone integration allows for…

Cloud Video Management: Viewing your camera's footage from the phone without having to connect the camera or SD menu to the computer. From here y'all can download videos and save them to your telephone

Alive-View: Viewing a alive-stream into the photographic camera when within proximity of the camera's WiFi network.

MayDay: Cobra'south MayDay feature allows you create an emergency contact and auto-upload your location and MayDay detect when the camera'south G-Sensor detects a severe
bear on/collision.

Over-The-Air Firmware Updates: Have the latest features and issues-fixes loaded to your photographic camera via the mobile application

Connectedness INSTRUCTIONS

1.  Starting time the Bulldoze Smarter App and log in/create an account.
2.  Follow the instructions in the Drive Smarter App to create a vehicle and connect the camera
3.  When consummate, a chime volition audio on the camera and it volition announced as Connected in the Drive Smarter App.

iRADAR® APP Connection

Connecting to the iRadar App enables your camera to receive real-time driver alerts nigh what is on the road ahead including:

CONNECTION INSTRUCTIONS For iPhone® 6s and later.

•  Power on your dash cam and be sure that Bluetooth is enabled
•  Brand certain your iPhone's Bluetooth is ON. The dash cam will Non APPEAR in the iPhone's Bluetooth Settings Carte.
•  Start the Cobra iRadar App. Press the Menu push button in the upper left of the app and select Devices. Follow the onscreen instructions to complete the pairing and connection.
•  When complete, a "continued" chime will sound and the Bluetooth icon will plow white on the dash cam display.

For Android™ Devices.

•  Power on your dash cam.
•  Enter your Android device's Bluetooth Settings Menu.
•  Scan for Devices and select Drive HD to pair.
•  Enter the Cobra iRadar App. A "connected" chime will sound, and the Bluetooth icon volition turn white on the dash cam display

VIDEO SCREEN

The Video Screen is the dwelling screen for the device. With the SC200, based on settings, you tin can have 1 view or ii views (picture-in-film).
VIDEO SCREEN Basics:
When first powered on, the display will show yous what the camera sees. Note that the button functions are different depending on whether the unit is currently recording or not. When commencement turned on or connected to power, the dash camera is in Loop Recording mode. Loop recording must be stopped for the unit to enter the Settings Menu.

STATUS BAR ICONS:

1.  Indicates when camera is loop recording Take chances icon appears in status bar if an Emergency Recording is in progress. The videos is being locked.
2.  Indicates the recording time of the current clip
3.  Indicates resolution of electric current recording
4.  Indicates loop clip time (1 minute, ii minutes, three minutes)
5.  Indicates whether the microphone is active or muted
6. Indicates if Motion Detection is enabled
7. Indicates that WiFi is enabled on the Nuance Cam, WiFi connection is possible if paired with phone
8. Cerise icon indicates that GPS is on, but there is no satellite lock. Green GPS icon indicates that the GPS has a satellite lock.
9. Indicates that Bluetooth is enabled, Bluetooth connection is possible if paired with phone
10.  Indicates that Parking Mode is enabled

VIDEO SETTINGS

Video Resolution:
This setting allows you to set the following resolutions on your SC 200. Higher resolutions will give yous a clearer image only accept up more space on the memory carte du jour. The available resolutions are:

• 1600P QHD 2560 x 1440 30 Frames per 2d (Forepart View Simply)
• 1080P Full Hd 1920×1080 xxx Frames per Second
• 720P HD 1280×720 60 Frames per Second
• 720P Hard disk  1280×720 xxx Frames per 2d

Loop Clip Time:
This setting allows you to control the duration of each individual movie clip on the device. Video clips can exist ready to durations of 1 minutes, 2 minutes, or 3 minutes.

VIDEO AND Photo PLAYBACK Way
This device stores video and pictures on its removable Micro SD Card. Playback fashion will allow you to review the saved video and photos and play dorsum the video with audio. To select a video or photo for playback navigate with the arrows and select with the OK primal. The Dorsum fundamental will return y'all to the previous screen. Photos tin can exist viewed and deleted. It is non necessary to lock photograph files – they are not overwritten by continuous loop recording.

Voice ANNOUNCEMENTS

Your photographic camera can warn you lot when you are budgeted ruddy-low-cal and speed-cameras, user-reported police force, radars detected in the surface area, accidents, and more from our community of users. When continued to the iRadar Mobile App, your camera tin can tell yous what kind of threat you are budgeted (For example: "Police Spotted Ahead" or "Accident Ahead") to help keep you rubber on the road.

Vocalism COMMANDS

Your unit supports the following vox commands to proceed your hands on the wheel and optics on the road. Annotation: Please ensure you lot reject your stereo when decision-making the unit with your phonation.

Retentiveness Carte du jour STORAGE

LOOP RECORDINGS:
In one case the SD card is full, the camera volition continuously overwrite the oldest footage recorded with recent recordings. To protect a prune then that information technology will non be overwritten, press the Emergency Record/Favorites Button so that the clip is moved into the locked content partition.

EMERGENCY RECORDINGS:
An Emergency Recording is triggered when the Emergency Record/Favorites Button is pressed or when the G-Sensor registers a significant impact (hard braking or collision). Emergency Recordings create locked files that are not overwritten by Continuous Loop Recording. To ensure that important footage is not lost surrounding an incident, the prior video clip is locked if the incident happens within xxx seconds of the beginning or terminate of a prune.
PHOTOS:
Photos are automatically saved in the Locked segmentation of the SD bill of fare.

SAFETY FEATURES

The SC Series Dash Cams come with several safety features designed to protect you and your vehicle. You tin accommodate the level of protection that fits yous via Camera and Bulldoze Smarter App settings.

G-Sensor Bear on Detection:
Your Dash Cam includes a built in G-Sensor which allows the device to make up one's mind when the car has been in a standoff. If information technology detects a standoff, it automatically locks the recording being fabricated at the time of the accident. Additionally, if the event occurs within 30 seconds of the start or end of a clip, the adjacent recording will also be locked so yous always have at least 30 seconds saved from before and after the event. You can use this setting to prepare the sensitivity of the G-Sensor from ane-three or turn it off. Level 1 is the easiest to actuate the G-sensor. Level 3 volition only lock videos when the near severe impacts are detected. Locked videos created equally a result of a 1000-sensor impact detection are stored in the Events folder on the SD card.
Parking Fashion & Motility Detection:
Parking Mode uses the Motion Sensor and G-Sensor to monitor while your vehicle is parked. The idea is that when you are parked, the dash cam will be "sleeping", but it will monitor surroundings for motion along with 1000-Sensor impacts. If it detects motility or if it detects an touch, then the unit will wake up and start recording. The camera volition enter parking mode after v minutes. If in that location is no motility is during this period, the display will turn off and the recording will stop (the camera monitors for g-sensor impacts or motion). If motion is detected or if a G-sensor impact to a higher place Level i is triggered, the unit volition wake up and start saving 1 minute clips for as long equally activity is being detected.

Notes:

•  Parking Mode only works properly if the dash cam is powered. Either the Cigarette Lighter Socket must remain on with the ignition off, or the nuance cam must be hardwired to a abiding power source (delight check world wide web.cobra.com for available accessories).
•  If you lot park where there is lots of activeness which keeps triggering the motion sensor, then the unit might never time out and enter the sleep state. For this you tin can utilise the "Auto Surveillance Shutoff" setting to preclude unnecessary recording. If leaving your vehicle off for more 48 hours (or less if your battery is quondam) please apply the "Auto Surveillance Shutoff" setting to set a time-limit on Parking Mode and foreclose your battery from being tuckered.
•  You can cull to take your camera monitor for impacts and/or motion by controlling the 'Parking Manner' and 'Motion Detection' settings separately.

Lane Departure Alarm

The Lane Departure Warning System (LDWS) provides aural and visual warnings as you arroyo a lane purlieus. It volition indicate whether yous are departing the lane to the left or to the right. Annotation that this characteristic relies solely on analyzing video of the road ahead and, therefore, works best on clearly marked roads with good visibility. This feature is for informational purposes only. Run across the Trademark Acknowledgement, Warnings, and Regulatory Data section below for the full legal disclaimer for using this feature.

Frontwards Collision Warning

The Frontal Collision Warning System (FCWS) provides audible and visual warnings if you are quickly budgeted an obstacle in the road ahead. Note that this feature relies solely on analyzing video of the road ahead and therefore works best with skilful visibility. This feature is for information purposes but. Run into the Trademark Acknowledgement, Warnings, and Regulatory Data department below for the full legal disclaimer for using this feature.

Speed Alarm

The Speed Alert system uses the GPS included in your camera to monitor your speed. In the ADAS Settings menu, y'all can set a speed limit for yourself. If the photographic camera detects that you lot are driving faster than your pre-gear up speed limit, it volition alert y'all with an aural tone and by flashing the alert on the photographic camera display.

Full general SETTINGS

Video Resolution:
Allows you to select the desired video resolution for loop recordings and emergency videos. Lower resolution settings event in smaller file sizes, which results in more space on the SD card.
Loop Clip Time:
Loop recordings and emergency videos can exist saved in 1 min, 2 min, or three min clips depending on your preference. Smaller (1 min) files are easier to transfer to your telephone and share.
Wi-Fi:
Allows enabling/disabling WiFi connection on the device and viewing the camera's WiFi proper name and countersign.
GPS:
GPS can be disabled if needed. Enabling this setting allows your recordings to have an exact GPS location stamped on the footage. This also always allows you to know the location of your vehicle if the photographic camera is wired via a hardwire kit and connected to a WiFi hotspot is installed in the car.
Bluetooth:
Allows you to disable Bluetooth if needed. Bluetooth is enabled by default. Note: The photographic camera volition non exist able to connect to the Drive Smarter App if Bluetooth is disabled.
Display:
Setting allows you to choose the feeds that are displayed on the screen while the camera is powered. Choose Front view, cabin view, or Picture in Picture (Front View and Cabin View)
Appointment/Fourth dimension:

•  Enable "Automated" mode to have date / time settings based on the camera'due south GPS signal. Having the correct appointment and time ensures that timestamps associated with your videos are authentic. In this mode, you lot volition still have to ensure that you have picked the correct "Fourth dimension Zone" and enabled or disabled "Daylight Savings" based on your location.
•  To manually set the date and time, cursor downwardly to "Manual", and select it. Y'all will now be able to enter Engagement and Time information.

Phonation Commands:
Vocalization Commands can be toggled on/off in this setting.
Microphone:
Microphone tin be enabled or disabled via settings or on the master screen. When disabled your recorded videos volition exist silent. Voice Commands are not affected past turning off the microphone.
Motion Detection:
Enabling Movement Detection allows your photographic camera to monitor movement around the camera (changes in light) which can be used to record any suspicious activeness around the vehicle when parked. This setting screen allows you to choose which of the available cameras should exist used 14 | P a g  to monitor for activity. If leaving your vehicle off for more than 48 hours (or less if your bombardment is sometime) delight utilise the "Car Surveillance Shutoff" setting to set a time-limit on Motion Detection and prevent your battery from being tuckered. Note: For Move Detection to work the camera needs to be continued via hardwire kit (part: CA-MICROUSB-001) or be plugged into an 'always on' Cigarette Lighter Socket. Y'all can check if your vehicle has an 'always on' CLA adapter online or in the vehicle'south owner's manual.
Parking Style:
Enabling Parking Way allows your photographic camera to monitor for changes in its internal G- Sensor/accelerometer. Bumps, Collisions, and pause-ins can trigger the Chiliad-Sensor to salve valuable footage from the moment of touch. If leaving your vehicle off for more than 48 hours (or less if your battery is former) please use the "Auto Surveillance Shutoff" setting to set up a fourth dimension-limit on Motion Detection and forestall your battery from being drained. Note: For Parking Mode to work the camera needs to be continued via hardwire kit (part: CA-MICROUSB-001) or be plugged into an 'ever on' Cigarette Lighter Socket. You can check if your vehicle has an 'always on' CLA adapter online or in the vehicle'southward owner's manual.
Surveillance Auto Shutoff:
If leaving your vehicle off for more than 48 hours (or less if your bombardment is old) please utilize the "Auto Surveillance Shutoff" setting to set a time-limit on Motility Detection and Parking Mode to foreclose your bombardment from being drained.
G-Sensor:
Yous can use this setting to set the sensitivity of the G-Sensor from 1-3 or plow it off. Level 1 is the easiest to activate the Thou-sensor. Level iii is the setting which volition only lock videos when the nigh severe impacts are detected. Level 1 is recommended for almost users.
Watermark (Date/Time, Speed, GPS, Commuter ID Video Stamp
The watermark settings let you to toggle having the date/time, speed, GPS coordinates, the Cobra logo and a custom Commuter ID be stamped into the bottom of all recorded video.
Commuter ID Watermark:
This setting allows you to associate a Driver ID with the camera (for example: John, Employee 12, etc). This allows yous to prepare the name of the driver which will be stamped on the footage as part of the watermark.
Exposure:
Allows y'all to conform how light or dark videos and images will appear on the photographic camera.
Push Beep:
Turns the sound on or off for button presses. Notation: this but affects normal push button presses. Fault messages or Vox Announcements are non affected by this setting.
Screen Saver:
Allows you to ready a duration after which the device'south display turn off with the camera still recording. This setting is useful to avoid distracted driving and having a brilliant LED screen when driving at night.
Interior Nighttime Vision:
The interior camera'south infrared LEDs let for clear recording at night. Yous can prepare this to be always on, off, or select Auto to allow the camera to notice low-light atmospheric condition and automatically enable Interior Nighttime Vision recording.
Language:
This setting allows yous to pick the on-screen language for the camera unit.
Commuter Assistance (ADAS):
ADAS features allow you to receive warnings when you are in danger of colliding with an object in forepart of you (Forrard Collision Alert), globe-trotting out of your lane (Lane Departure Alert), and Speeding across a limit you lot tin pre-fix for yourself (Speed Alert). You tin can toggle each of these alerts on/off within this menu. To employ ADAS features, please ensure that the camera'due south vision system is properly calibrated, and that the dash camera is properly oriented relative to the road ahead.
To Calibrate:
Cursor over the "Scale" item and press "OK" to select. For a properly mounted dash photographic camera,

•  The vertical line would announced to divide the windshield into equal parts.
•  The horizontal line would align with the front edge of your vehicle'southward hood if your hood is visible.

iRadar Network Alerts:
This setting allows the user to program real-time driver alerts acquired from the iRadar network. Hither yous can cull to have the camera make a vocalism announcement when there is a red-light camera or speed-camera alee, or to but display the alert on the LCD brandish. You can also choose to plow notifications from the unit off completely and simply follow along using the iRadar App.
Bulldoze Smarter Services:
These settings allow yous to select which videos you would similar auto-uploaded to the Drive Smarter App for sharing/review. Yous can besides choose to accept Incident Reports sent to your insurance provider, also equally Mayday alerts sent to your Emergency Contact if a severe Thousand-Sensor issue is detected.
Speed Units
Choose between miles/60 minutes or kilometers/60 minutes as the speed unit of measurement stamped in the watermark. 16 | P a g due east

Volume:
Allows you lot to enhance and lower the volume of notifications and push button beeps from your camera.
WDR:
Enabling Wide Dynamic Range allows your photographic camera to accurately capture footage in very bright conditions. Enabling this characteristic is recommended for almost recording conditions.
GPS Format:
Choose between Decimals and Degrees as the GPS format that is stamped in the watermark.
Frequency:
Choose between 50Hz and 60Hz as your operating frequency if y'all are experiencing flickering in your video.
Format Reminder:
Choose the recurrence at which yous are reminded to format the Micro SD carte. Formatting the SD card frequently ensures your videos are protected and the SD card is saving content properly.
Delete Videos Reminder:
Set this to exist periodically reminded to costless up locked video content so that the camera does non run out of "Emergency Recordings" and "Favorites" infinite.
Restore Defaults:
Resets the device to manufacturing plant settings. Annotation that restoring defaults will Not erase information on your memory bill of fare.
Format SD Card:
Allows you to format the inserted SD Card. NOTE: This action will permanently delete all data on the card. It is recommended to format whatever new card and periodically format existing cards.
Most You can use this setting to view your cameras electronic series number, manufacturer part number, and Firmware

FIRMWARE UPDATES

Using the Drive Smarter App

•  View the current firmware version nether the Most carte item on the Nuance Cam
  •  End loop recording
  •  Press the Carte button, cursor down to the ABOUT item
  •  Note the firmware version shown on the screen
•  Power upwards your photographic camera past connecting to constant power source such as your vehicles CLA adapter or a household outlet.
•  When you lot Connect your camera, the app will check if a newer firmware update is available on the server.
•  Press 'Download' on the notification to download the latest Firmware.
•  Follow the instructions on the Bulldoze Smarter Mobile Application. If successful, the camera'due south LED's will brainstorm blinking while the firmware is being installed.
•  To check that the Firmware update was successful, you tin check the 'About' screen in your photographic camera's settings menu

Using a Mac or PC

• For optimal performance, check world wide web.cobra.com periodically for software updates.
•  View the electric current firmware version under the About carte du jour item on the Dash Cam
  •  End loop recording
  •  Press the MENU button, cursor downward to the Nigh particular
  •  Note the firmware version shown on the screen
•  Connect the Dash Cam to your estimator using the included USB to Micro-USB cablevision.
•  Power on the Nuance Cam and select Connect to Computer using the record/select button.
•  The photographic camera will be listed in Windows Explorer/Finder.
•  Download the update file from www.drivesmarter.com and save it to your reckoner. It will finish with ".bin" equally the file extension. Note: Yous do not need to double click or open this file on the estimator.
•  Copy/paste or drag the update file you downloaded .bin file into the root directory of the Camera'south SD Bill of fare.
•  Wait for the file to transfer and and so safely disconnect the Dash Cam from the figurer. The Dash Cam will turn off.
• Plug the Micro USB cord into a reliable power source such every bit your dwelling house's outlet or your vehicle'south CLA adapter. The Nuance Cam will turn on and automatically kick into the Firmware Update Bill of fare.
•  Follow the directions on the camera brandish to update firmware if the unit has one. Units without displays volition update automatically.
•  You can cheque if your photographic camera is upwards to date by checking the firmware in your photographic camera's 'About' setting submenu in the camera or via the app.

Photographic camera SPECIFICATIONS

TROUBLESHOOTING

If your unit does not appear to exist operating properly, please follow these troubleshooting steps:

•  Make sure the ability string is properly connected.
•  Make sure the socket of your vehicle'southward cigarette lighter is make clean and complimentary of corrosion.
•  Make sure the power cord's cigarette lighter adapter is firmly seated in your cigarette lighter
•  Make sure you have downloaded the latest firmware to your unit of measurement

FAQ

• Where practise I mount/position my Nuance Camera on the windshield?
  Ability on your dash cam so you can encounter the camera'due south view while mounting. Nosotros recommend centering your camera and mounting under the rear-view mirror.
  If your unit of measurement has a brandish, you lot tin use the Camera's "Calibrate" feature found in the ADAS card to line upwardly your view. SC100 users can use the Drive Smarter app to get a live-view of what the photographic camera is seeing to help with mounting.
• What is the largest MicroSD card size I tin use in my camera?
  We recommend using a Grade 10 Micro SD menu from a reputable vendor upward to the following sizes.

Model	SC100	SC201	SC200
Max SD Menu Size	128GB	256GB	256GB

• Why is my unit non powering upwardly?
  Please ensure your unit of measurement is properly connected. If yous have turned the unit off, press and hold the power button to turn on again. If yous are using Parking Style and Motility Detection Mode with a hardwire kit, the unit might not "wake up" when you enter. Only brainstorm driving and when your unit detects this it will wake upward and begin recording.
•  Why do recordings of the motel/vehicle'due south interior appear black and white?
  This is normal operation of the Infrared LED night-vision camera. Infrared recording allows the photographic camera to accurately record your vehicle'due south cabin in low-lite conditions. Yous can turn Infrared recordings off in the settings card.
• How do I use Parking Style and Motion Detection?
  Parking Mode and Motion Detection tin can be turned on in the camera's settings. These two features will monitor your vehicle automatically when the unit of measurement is connected directly to the automobile's vehicle via hardwire kit (bank check for availability at www.cobra.com).
  Note: When the motorcar is parked your unit will become into a depression-power "standby"/sleeping land where it monitors for activity. The unit volition automatically wake up when it detects significant motion or driving.
• Why is my unit not getting a GPS Lock (GPS icon is red)?
  The GPS inside the device locks in with the satellite best when you are on the road. You may non be able to go a GPS lock while in your garage, parking structures, or if testing the camera in your domicile.

TRADEMARKS ACKNOWLEDGEMENT, WARNINGS, and REGULATORY Data

Cobra and the snake design are proprietary trademarks of Cobra Electronics Corporation, USA. Other trademarks and trade names are those of their respective owners.
Cobra Electronics Corporation™ is a trademark of Cobra Electronics Corporation, USA. The Bluetooth® word mark is a registered trademark owned by Bluetooth SIG, Inc. and any use of such marks by Cobra Electronics Corporation is under license. Other trademarks and merchandise names are those of their respective owners. The Driver Awareness Alert display feature is subject to US Patent Numbers 8,842,004 and 8,970,422 and additional awaiting US Patent Applications. Warning ! The forward collision alarm arrangement (FCWS) feature, when turned on, is for limited informational purposes only. The FCWS does Non replace a driver's responsibility to use safe driving judgment, comply with all traffic regulations and observe all route and driving conditions at all times. The FCWS uses the camera to provide a alert of upcoming vehicles [and large objects] and, as a result, may have reduced or no functionality in depression visibility or sure weather condition conditions. Driver is responsible for the safe functioning and control of the vehicle. Do not substitute your driving judgment with the data provided by this characteristic. Cobra disclaims liability for injuries, amercement, or expiry arising from utilize of this feature. Warning! The Lane Departure Alert Organization (LDWS) feature, when turned on, is for limited informational purposes but. The LDWS does NOT replace a driver's responsibility to use safe driving judgment, comply with all traffic regulations and observe all road and driving conditions at all times. The LDWS uses the camera to provide a determine if the vehicle is drifting toward or parting from designated lane markings and, as a result, may have limited functionality in low visibility or certain conditions conditions or when driving on unmarked or poorly marked roads." Driver is responsible for the condom performance and control of the vehicle. Do non substitute your driving judgment with the information provided past this characteristic. Cobra disclaims liability for injuries, amercement, or decease arising from use of this feature. NOTE: This device complies with function xv of FCC rules: Operation is subject area to the following two conditions:  This device may not cause harmful interference, and  This device must take any interference received including interference that may cause undesired operation. CAUTION: Modifications or parts not approved by Cobra Electronics Corporation may violate FCC Rules and void authority to operate this equipment. This device complies with RSS-310 of Industry Canada. Operation is subject to the status that this device does not cause harmful interference. Can ICES-3B/NMB-3B.
DISPOSAL OF ELECTRONICS EQUIPMENT: This production may incorporate hazardous substances that could affect wellness and the environment if not tending of properly.
The crossed out wheeled bin symbol indicates that the product should not be disposed of forth with household waste matter. Information technology should be handed over to an applicative collection point for the recycling of electric equipment. Past ensuring that this product is disposed of correctly yous will help/prevent potential negative impact on the environment. If you need more information on the collection, reuse and recycling systems, please contact your local civic function or the shop where it was originally purchased.

Documents / Resources

chacesurniarten.blogspot.com

Source: https://manuals.plus/cobra/sc200-configurable-dash-cam-manual